| This product has been discontinued. |
|
Specifications
|
Transport |
| No. of Recording Units | 2 |
| Pancake Diameter | max. 14 inches |
| Tape | Tape Width = 0.15 inches
Tape Speed = 120/150/240 ips |
| No. of Tracks | 4 Tracks, 2-Chennel Record Head x 2 (Ferrite) |
| Tape Drive | 2 Independent Systems
PLL Servo DC Direct Drive Capstan Motor
DC Take-up and Supply Reel Motors
Tape Cleaners |
| Speed Deviation | Within ±0.15% |
| Wow & Flutter | Less than 0.08% (DIN 45507 PEAK WTD) |
|
Electronics |
| Bias Frequency | 8 MHz |
| Record Equalizer | 4 Positions
a. 64x
b. 80x
c. 128x
d. Custom Speed (not set) |
| Bias | 4 Positions
a. 64x (ref. tape)
b. Custom (not set)
c. Custom (not set)
d. Custom (not set) |
| Record Amplifier | 4 Channels - 2 Systems
4-Position EQ:
EQ1: 64x - adjusted
EQ2: 80x - adjusted
EQ3: 128x - adjusted
4-Position Bias:
BIAS 1: 64x - adjusted (for ref. tape) |
| Frequency Response | 64x: 40 Hz to 18 kHz +2/-6dB, 100 Hz to 15 kHz ±2 dB
80x: 40 Hz to 18 kHz +2/-6 dB, 100 Hz to 15 kHz ±2 dB
128x: 40 Hz to 12 kHz +2/-6 dB, 100 Hz to 10 kHz ±2 dB |
| Signal-to-Noise Ratio | Less than 4 dB (blank tape, DIN audio filter)
Less than 4.5 dB (with HX Pro) |
| Distortion | Less than 3% (1 kHz, SRL IEC. With Fe2O3 tape)
Less than 0.6% (circuit only) |
| Crosstalk | Better than 65 dB (1 kHz, CH2 to CH3, IEC SPL)
Better than 30 dB (1 kHz, CH1 to CH2) |
|
Miscellaneous |
| Power Supply Requirement | 100, 110, 117, 220, 240 VAC ±5%, 50, 60 Hz |
| Power Consumption | 480 VA (peak 760 VA) |
| Weight | approx. 180 kg |
| Dimensions (W x D x H) | 902 x 587.5 x 1512 mm |
| Option | PB-84HA: Hour Meter PCB Assy
ZA-42Y-S: Dolby HX Pro (factory option)
ZA-76H: Table Assy
ZA-97P: Toneburst Generator (for Dolby HX Pro adjustment)
ZA-97S: Master A/B Selection Assy
ZA-97V: Monitor Amplifier Assy
ZA-97W: Mode Control Box (EQ Select Switch) |
|
System Performance |
Frequency Response
(excl. contour effect) | 64x: 40 Hz to 18 kHz +1.5/-3 dB
80x: 40 Hz to 15 kHz +1.5/-3 dB
128x: 40 Hz to 10 kHz +1.5, -3 dB |
| Signal-to-Noise Ratio | Less than 4 dB (blank tape, DIN audio filter)
Less than 4.5 dB (with HX Pro) |
| Distortion | Less than 3% (1 kHz, SRL IEC. With Fe2O3 tape)
Less than 0.6% (circuit only) |
| Wow & Flutter | Less than 0.08% (DIN 45507 PEAK WTD) |
| Crosstalk | Better than 65 dB (1 kHz, CH2 to CH3, IEC SPL)
Better than 30 dB (1 kHz, CH1 to CH2) |
| Speed Deviation | Within ±0.15% |
|
Specifications are subject to change without notice or obligation.
|
home