| LW-10 Optical Wiring System |
| This product has been discontinued. |
|
Specifications
|
Inputs/Outputs |
| Input | Pad: Mic = 0 dB, Line = 18 dB
Input Impedance: Mic = 2 kΩ, Line = 10 kΩ
Ref. Level (+4 dBu): Mic = -64 dBu (VR max), -17 dBu (VR min). Line = -37 dBu (VR max), +10 dBu (VR min).
Max. Level (non-clipping, +24 dBu): Mic = -44 dBu (VR max), +3 dBu (VR min). Line = -17 dBu (VR max), +30 dBu (VR min)
Connector: Canare FK37-31S (female) |
| Output | Output Impedance: max. 5Ω
Ref. Level: +4 dBu (-20 dB from peak)
Max. Level (non-clipping): +24 dBu (digital peak)
Connector: Canare FK37-32S (male) |
| Microphone Head Amplifier | Balanced input. With +48-V phantom power |
| Headphone Output | Impedance: 8Ω
Connector: φ6.3-mm stereo phone jack (mono output) |
|
Electronics |
| Sample Rate | 48 kHz |
| A/D Conversion | 20-bit ΔΣ 64x Oversampling |
| D/A Conversion | 20-bit ΔΣ 8x Oversampling |
| Transmission Distance | Less than 3 km (direct output only). Less than 500 m (through output) |
| Frequency Response | 10 Hz to 22 kHz |
| Equivalent Input Noise | Mic Input EIN: -129 dB (max. gain, 200Ω termination) |
| Distortion | Less than 0.005% (1 kHz, peak) |
| Dynamic Range | Better than 108 dB (1 kHz) |
| Crosstalk | Better than 100 dB (1 kHz) |
|
Miscellaneous |
| Power Supply Requirement | 100 to 120 VAC, 200 to 240 VAC (±10%), single phase 50/60 Hz |
| Power Consumption | 350 VA (LW-10S), 300 VA (LW-10C) |
| Operating Environment | Temperature: -10 to 50°C, Relative Humidity: 20 to 80% |
| Weight | 20 kg (main unit), 10 kg (PSU) |
| Dimensions (W x H x D) | 482 x 265.5 x 400 mm (main unit), 482 x 132 x 400 mm (PSU) |
| Option | Intercom Interface (for ClearCom, RTS, Telex)
Control Data Interface (for RS-232C, RS-422A, MIDI)
Digital Through Output for LW-10C
Analog Monitor Output for LW-10C
Extender PCB Assembly |
|
Specifications are subject to change without notice or obligation.
|
home